Hot melt adhesives, hot melt glue production for waterproof coil material
DESCRIPTION
The Jaour this kind glue is a synthetic rubber based hot melt pressure sensitive adhesive specifically developed
for high performance product assembly applications where good tack and adhesion are required, such as
waterproofing materials for construction.
SUGGESTED USES
Waterproofing materials assembly for construction, or other pressure sensitive adhesive applications that high
tack , peel and flexibility are required.
TYPICAL PROPERTIES
Appearance : Yellow translucent solid
Color (Gardner) : ≤ G6
Softening Point (R&B) : approx. 100 ℃
Viscosity (Brookfield) :@180 ℃ approx. 5,600 cps
OPERATING GUIDES
The material can be applied by slot or roll coating applicators. Suggested operation temperature is 145 – 175 0 C
for both, depending on machines, substrates, and plant conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.
| Composition | Resin and thermoplastic rubber |
| Gardner Color | ≤ G1 |
| Appearance | Light yellow translucent solid |
| Brookfield Viscosity | 6200 mPa.s at@200°C |
| 10100 mPa.s at@180°C |
| 19500 mPa.s at@160°C |
| 43000 mPa.s at@140°C |
| Softening point | Approx. 101°C |
| Application Instruction | 1. Suggested operation temperature: 150°C-180°C. |
| 2. Application methods : slot or roll coating. |
| 3. Substrates, release paper and application environment will affect its adhesion performance, so trial use is recommended. |
| 4. There should be no dust and oil on substrates and release paper. Substrates should be well conditioned under standard temperature and humidity |
| Package | 6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box. |
| Storage | The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 350C and above 50C. Direct sunlight and moisture condensation must be prevented. |
PACKAGE
6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box.
Please consult the sales representative for special requirements.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original
packages under dry and clean conditions at ambient temperature below 35 ℃ and above 5 ℃
Direct sunlight and moisture condensation must be prevented.
OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal
protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is
suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.
FAQ
Q: Are you the factory or trading company?
A: We are professional manufacturer for Hot Melt Glue Since 2006;We have three factories.
Q: What is your Minimum Order Quantity of your Product?
A: Normally the MOQ is 1Ton;
Q: What's your payment term?
A: Normally we do 30% T/T IN ADVANCE, 70% balance before shipment. Other payment terms can be discussed case by case;
Q: What's your after-sales service?
A: Free online technology services 24h hours or engineers are available to serve adhesive application overseas and travel cost will be born by our side;
Q: Where is the factory location?
A: Our head office is in Shanghai and have two branches in Jiangsu province.
Q: How Arrive to the factory?
A: You can arrive to Shanghai Hongqiao Airport or Hongqiao railway station, we will pick up you when you arrive.
Product Tags:
|
|
Water White Hot Melt Glue Adhesive , Hot Melt PSA For Waterproof Coil Material Images
|
